研究领域

增材制造技术（粉末材料和食品）

大功率器件可靠性

电子封装技术

论文与著作

[1] Effect of process parameter optimization on morphology and mechanical properties of Ti6Al4V alloy produced by selective laser melting. Progress in Natural Science: Materials International.2024.

[2] Influence of oxygen content on selective laser melting forming spheroidization in additive manufacturing technology. RSC Advances. 2024, 14(5), 3202-3208.

[3] Study on Polystyrene Powder Materials for Selective Laser Sintering. Iranian Polymer Journal 2024. 22: 1-14.

[4] Effect of forming angle on the microstructure and properties of GH3536 nickel-based superalloy formed by SLM. Rapid Prototyping Journal. 2024, 30(2), 393-403.

[5] Design and optimization of heat treatment process parameters for high-molybdenum-vanadium high-speed steel for rolls. Materials. 2023, 16, 7103.

[6] Selective laser sintering of acrylonitrile butadiene styrene polymer and post-processing enhancement: an experimental study. Iranian Polymer Journal 2023, 32, 1537-1550.

[7] Research on the microstructure and mechanical properties of repaired 7N01 aluminum alloy by laser-directed energy deposition with Sc modified Al-Zn-Mg. Metals 2023, 13, 829.

[8] Study of the solder characteristics of IGBT modules based on thermal-mechanical coupling simulation. Materials 2023, 16, 3504.

[9] Research on characterization of nylon composites material filled with Al₂O₃ particle. Polymers 2023, 15(10), 2369.

[10] Estimation of the Critical Value of the Second-Phase Particles in the Microstucture of AZ31 Mg Alloy by Phase-Field Methods. Crystals 2022, 12, 1504.

[11] Hydrothermal growth of ZnO nanoparticles on the surface of two kinds of Ti3C2 co-catalysts with different interlayer spacing towards enhanced photocatalytic activity. Micro & Nano Letters. 2022, 1–12.

[12] Study on the Polymer Material Infiltrating Metallic Parts by Selective Laser Sintering of 3D printing, Rapid Prototyping Journal. 2018. 24(9):1539-1545.

[13] Investigation on fatigue behavior of single SnAgCu solder joint by rapid thermal cycling. Soldering & Surface Mount Technology, 2015, 27(2):76-83.

[14] Study on rapid thermal cycling by inducted heating for microstructure of single SnAgCu solder joint. Science and Technology of Welding and Joining, 2012, 17(3): 237-243.

[15] Study of the selective laser sintering of Polycarbonate and post process for parts enhancement. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2007, 221(L1):37-42.

[16] Experimental investigation into the selective laser sintering of high impact polystyrene. Journal of Applied Polymer Science. 2008, 108(1): 535-540.

荣誉与奖励